• page_banner

Non-woven nylon polishing pad fickert fiber grinding block for polishing ceramic tile,quartz

Short Description:

Non-woven nylon fickert fiber grinding block is a type of abrasive material that is used for polishing and finishing of surfaces like ceramic tile and quartz.

It is made of nylon fibers or non-woven fabric that are impregnated with abrasives like diamond, silicon carbide, or alumina, then assembled the fiber on fickert head plastic plinth with strong adhesive so it can install in automatic polishing machine.

The finishing surface can achieve satin or glossy surface. There are two available sizes: L142*H37*W65mm (for ceramic tile most) & L170*H40*W61mm(for cement quartz most) .

Product Detail

Product Tags

Product Video

Product Introduction

Non-woven fickert abrasive fiber grinding block is very flexible, which means it can easily adapt to the shape of the surface being polished. Besides, abrasive fiber is impregnated with abrasive material (diamond abrasive and silicon abrasive) that are easy to remove scratch and enhance glossiness which can achieve soft light or glossy surface.

The non-woven fabric used in the pad does not trap dirt and debris,so it can clean and polish the stone surface uniformly.



图片 2

Fickert type abrasive fibers are applied to continuous automatic polishing machine, after applying a range of grit number, the finish surface is with soft light(between 15-30 degree) or shiny surface(between 60-90 degree) .

Parameter & Feature

• Size: L142*H37*W65mm, L170*H40*W61mm

• Material: non-woven micro-fiber + diamond powder + silicon powder

• Regular grit: 120# 180# 240# 320# 400# 600# 800# 1000# 1200# 2000# 3000# 6000# 10000#

• Density:4P 5P 6P 7P 8P 9P 10P

• Color:grey,green,light blue

• Application: for soft light or glossy surface



L142*H37*W65mm fickert fiber are mainly applied to ceramic tile polishing machine because it will be more flexible which can match the shape of ceramic tile well and grind the surface evenly.

L170*H40*W61mm fickert fiber are used for artificial cement quartz,which can reach for soft and satin surface.


Do you have a minimum order quantity (MOQ) ?

Normally there’s no quantity limited, but if for samples testing, we do suggest you take the enough quantity so you can obtain the desired effect.

What’s the average lead time ?

For examples, our production capacity for abrasive brushes is 8000 pieces per day. If goods are in stock, we will send out within 1-2 days, if out of stock, production time might be 5-7 days, because the new orders have to wait in line, but we will try our best to deliver ASAP.

What’s the package and dimension ?

L140mm Fickert brush: 24 pieces / carton, G.W.: 6.5KG/carton(30x29x18cm)

L170mm Fickert brush: 24 pieces / carton, G.W.: 7.5KG/carton(34.5x29x17.4cm)

Frankfurt brush: 36 pieces / carton, G.W.: 9.5KG/carton(43x28.5x16cm)

Non-woven nylon fiber:
140mm is 36 pieces / carton,G.W.: 5.5KG/carton (30x29x18cm);
170mm is 24 pieces / carton,G.W.: 4.5KG/carton (30x29x18cm);

Terrazzo frankfurt magnesite oxide abrasive : 36 pieces / carton, G.W.: 22kgs / carton (40×28×16.5cm)

Marble frankfurt magnesite oxide abrasive : 36 pieces / carton, G.W.: 19kgs / carton (39×28×16.5cm)

Terrazzo resin bond frankfurt abrasive : 36 pieces / carton, G.W.: 18kgs / carton (40×28×16.5cm)

Marble resin bond frankfurt abrasive : 36 pieces / carton, G.W.: 16kgs / carton (39×28×16.5cm)

Cleaner 01# abrasive : 36 pieces / carton, G.W.: 16kgs / carton (39×28×16.5cm)

5-extra / 10-extra oxalic acid frankfurt abrasive: 36 pieces / carton, G.W.: 22. 5kgs / carton (43×28×16cm)

L140 Lux fickert abrasive: 24 pieces / carton, G.W.: 19kgs / carton ( 41×27×14. 5cm)

L140mm Fickert magnesium abrasive: 24pieces / carton ,G.W.: 20kgs / carton

L170mm Fickert magnesium abrasive: 18 pieces / carton ,G.W.: 19.5kgs / carton

Round brush / abrasive will depend on the quantity , so please confirm with our service.

What’s the payment term ?

We accept T/T, Western Union, L/C (30% down payment) against original B/L.

How many year of warranty ?

These abrasive tools are consumable commodities, normally we support refund within 3 months if any defective issue(which normally won’t happen). Please make sure keep the abrasive in dry and cool circumstance, in theory, the validity is 2-3 years. We suggest that clients purchase enough consumption for three months of production, rather than stocking too much at one time.

Do you support customization ?

Yes, we can customize the goods as per your drawing, but it will involve mould fee and require bulk quantity. Mould time will takes 30-40 days normally.

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • L140mm Mat Rubber Brush Airflex texturing Brush Filiflex antique brush

      L140mm Mat Rubber Brush Airflex texturing Brush...

      Product Video Product Introduction The Filiflex and Airflex brushes work on the material digging the softest parts, rounding up and smoothing the hardest ones. For an irregular but at the same time harmoniously wavy and natural-looking surface. Pleasantly irregular to the touch and with a particularly intense color, the final finish can be matte or shiny, more or less irregular, according to the sequence used. The grit of Filiflex brush is from 180# – 3000#. Made with many n...

    • T1 L140mm Metal bond diamond fickert abrasive brick for polishing granite stones

      T1 L140mm Metal bond diamond fickert abrasive b...

      Product Video Product Introduction These diamond fickerts are commonly used in continuous automatic polishing machines for large-scale stone processing operations. They are known for their high grinding efficiency, long lifespan, and ability to produce a smooth and polished finish on stone surfaces. Application Parameter • Materials: metal bond + diamond grains • Dimension: 140*55*42mm • Working thickness: 16mm • Grit: 36# 46# 60# 80# 120# 180# 240# 320# •...

    • L140mm Fickert silicon abrasive brushes for polishing ceramic tile to make matte surface

      L140mm Fickert silicon abrasive brushes for pol...

      Product Video Product Introduction The 4 rows of wires are designed to guide residue and waste water to drain out easily. Additionally, our plastic base has a patented beveled edge design which enables the brushes to be used until the very end, leaving behind less than 2mm of residue. The brushing process involves running the tiles through the machine, with the bristles of the Fickert brush gently abrading the surface of the tile to create a consistent matte finish. The specialize...

    • L170mm Antique finishing lapatro brush silicon fickert abrasive for porcelain tile deburring

      L170mm Antique finishing lapatro brush silicon ...

      Product Video Product Introduction The wires in 4 rows are intentionally arranged to effectively direct waste water and residue to drain away with ease. Moreover, our plastic base is made with a unique beveled edge design that enables the brushes to be utilized until the last bit is at the bottom, resulting in less than 2mm of remaining residue. Application The silicon lapatro brushes are installed on continual automatic polishing machine like Keda machine and ...